Quick Safety Tips for Wheel Loaders on the Job

What are the quick safety tips for wheel loaders on the job? Wheel loaders are used on a variety of job sites for a variety of tasks. They are typically used for lifting and moving big volumes of items as a type of front-end loader. Wheel loaders are one of the most useful pieces of heavy equipment on the job site, but they’re also one of the most dangerous, so safety is a major concern.

The potential for tipping and rollovers due to the machine’s off-centered or shifting center of gravity, materials falling out of the bucket or the arm being lowered onto workers, and injuries or damage caused by backing up with limited visibility are just a few of the major concerns associated with wheel loader safety.

To reduce the danger of crew injury or death, as well as damage to other equipment or materials while operating in or around one of these machines, become familiar with the following wheel loader safety recommendations.

Safety Recommendations for Wheel Loaders

• Anyone who uses a wheel loader should be thoroughly trained.
• Keep the owner’s manual in the machine so that all operators may access it.
• Before and after each use, conduct a complete pre- and post-operation examination of the wheel loader.
• Keep a close eye on the attachment to make sure it’s properly attached to the machine.
• Never use a wheel loader that shows evidence of deterioration, has faulty controls or safety features, or has other potential issues.
• When entering and exiting the cab, the wheel loader should be turned off and the arms should be lowered; maintain three points of contact between your limbs and the machine.
• Only operate a wheel loader while seated in the cab and wearing a seat belt or using the safety bars.
• Nobody should ever ride on the wheel loader’s exterior, including its arms or bucket.
• Never stand behind a wheel loader’s elevated arms or attachment.
• Examine all specifications to ensure you’re using an allowed attachment in the proper manner for the application.
• Never exceed the maximum load capacity of the machine.
• The bucket’s material loads must be uniformly distributed.
• Slowly and steadily lift and lower loads.
• When conveying a load, the bucket should be as low to the ground as feasible.
• Traveling across unstable or rocky terrain should be done slowly and with caution.
• When moving backwards, use the backup alarm and mirrors, and communicate with the ground crew.
• When climbing an incline, travel ahead; when descending a steep slope, travel backward.
• While a load is being hoisted, do not spin the wheel loader.
• Keep a safe distance away from trenches’ edges.
• To promote safety and efficiency, stay on top of preventive maintenance.

Source

Where to Sell Heavy Equipment?

Buy Your Equipment buys all sorts of equipment such as backhoes, bulldozers, compactors, excavators, track hoes, telehandlers, forklifts, cranes, motor graders, air compressors, crawlers, loaders, drills, forestry equipment, oilfield equipment, off-highway trucks, scrapers, skid steer, skip loaders, wheel loaders, dump trucks, tractors, trailers, and much more. Whether you have one piece or five hundred pieces, Buy Your Equipment is always here to help. We Buy Heavy Equipment daily. Give us a call, at 945-400-6965 or visit buyyourequipment.com

Other Related Articles