Looking for:

– How can I stop an unexpected Windows 10 update? | Windows 10 | The Guardian

Click here to Download


Step 4: Disk Clean-up will take a few minutes to calculate the free space but the specific time depends on how much files the disk has. Then you can tick the files needing to be deleted. Last, click OK to continue. Step 5: You can see a popup message Are you sure to want to permanently delete these files and click Delete File s to continue. Then the Disk Clean-up can be completed. In fact, when cleaning up disk, you may find that the capacity of system drive only can be increased a little.

If the size of new operating system is large, thus the capacity of system drive is not enough to install it Here is an article which introduces the Windows 10 Size. Therefore, applying best partition software to extend partition may be helpful. MiniTool Partition Wizard has been the choice of thousands of users. This high-performance tool helps make the optimal disk space distribution and ensure an ideal hard disk structure.

Buy Now. Step 1: To extend system partition , you had better use the bootable edition. Step 2: Connect it to your computer and boot from it. Step 3: Choose the system drive. Then choose Extend Partition from left pane or choose Extend from context menu. Step 4: Then open the dropdown list from the Take Free Space from menu and choose any partition or unallocated space on the same drive to take free space.

Meanwhile, you also can drag the sliding handle to decide how much free space you want to take. Then press the OK button to continue. Step 5: Choose the Apply button on the top of the menu to extend system partition. It can extend partition without data loss. Compared with extending volume by Disk Management, MiniTool Partition Wizard can extend partition even though there is no adjacent unallocated space on the right of the system partition. Therefore, MiniTool Partition Wizard is more convenient to extend partition.

It can take space from the nonadjacent unallocated space. So in order to solve this problem, you can run System File Checker to check and repair the corrupted system files. Step 1: Type Command Prompt in the search box of Windows 10 and right-click it to choose the Run as administrator. However, if none of above methods works, you may need to reinstall Windows And it is easy to operate.

Are you still troubled by Windows 10 update error after reading this post? When you extend partition, try to use MiniTool Partition Wizard. At the same time, remember to back up all files before you want to have a try on any method so as to avoid an accident. If you have any questions when you are using MiniTool Partition Wizard, you can contact us by sending email to [email protected]. Or if you have a nice solution to Windows 10 not upgrading, you can share it in the comment zone.

Download Partition Wizard. Read More. Remove third-party security software. Check Windows update utility manually. Keep all services about Windows update running.

Run Windows update troubleshooter. Restart Windows update service by CMD. Increase free space of system drive. Repair corrupted system files. Open Command Prompt as an administrator. Type the command wuauclt. Go to Windows Update tab and click Check for updates. What to do if my computer is stuck updating? Wait or restart the computer. Free up disk space. Disable all non-Microsoft programs. Turn off Firewall temporarily. Restart Windows update service.

No malware, I am sure. The update has corrupted my desktop and I cannot access anything to turn it back. All I can do is log in and resume the problem. I will attempt to provide more pictures.

As you can see I have attempted to troubleshoot wifi and I’m not sure what that yellow lock is. Everything is failing at the moment. Update: May 14th Was this reply helpful? Yes No. Sorry this didn’t help. For a moment I had my regular desktop. I had restarted the device again, and I assume this unresolved black desktop is Safe Mode. Because I cannot connect to my Router because of failing drivers to be able to download and update, I followed your second.

I had attempted to Go Back to Previous version, but that has failed. I returned to the black desktop and I am currently doing a CMD scannow if that helps anything. Still unresolved. Task manager is blank, and trouble shooting window is also blank. The windows home button still remains unfuctional only glows. The first time around starting up my PC, it takes me to the black desktop and I am attempting to fix the Location error. Once I resign out and back in, I am shown my original desktop for a few and then a Sihost.

I have found a manual way to access Windows Explorer to control panel. Choose where you want to search below Search Search the Community. Search the community and support articles Windows Windows 10 Search Community member. I appreciate all help.. This update is causing confusion. Update: May 14th I turned on my laptop for the first time today, and thankfully when logging in, before Windows updated my PC again, and my desktop has returned to normal and with all of my files.

Taskbar seems empty and I still have this popup: “Unknown hard drive error” I will keep other resolutions for future use. If it does reappear again. Thank you for assisting me.

The update has been applied but I may revert back to avoid this issue. This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question Report abuse. Details required :. Cancel Submit. Previous Next. Andre Da Costa Volunteer Moderator. As future Windows 10 feature updates are released it will introduce incompatibility with older devices and PC’s.



Windows 10 not booting after update may 2018 free. Windows 10 KB4549951 update is causing serious issues


The May Update for Windows 10 version 21H1 is now slowly rolling out as a minor update for compatible devices. This is the eleventh major refresh based on the same core file system available with versions 20H2 and , and it is the first semi-annual update expected for Since this is a minor update, it will arrive as a quality update for devices already running the two most recent versions without the need for reinstallation.

However, on computers still using an older release for example, the November Update , the upgrade won’t change, and complete reinstallation will be required. Although the upgrade process to a new version is usually smooth, there are always chances of issues, especially if you have to upgrade from a version that is no longer supported.

Usually, the problems happen due to the new system changes, but many other times, issues occur because of hardware and software incompatibility, outdated device drivers, or custom configurations. In this Windows 10 guide, we will walk you through the most common problems you’re likely to see during the upgrade of the May Update and the instructions to resolve them. On Windows 10, there are at least three types of problems when trying to upgrade. For example, you can come across issues with Windows Update, reactivation, and storage, which are usually not a problem with the new version.

Instead, they are common issues during upgrades. Then there are those problems that happen because of known or unknown bugs with the new release. You will see these issues during the installation process, and they are usually caused by compatibility problems with specific apps and drivers. Also, there is a third kind of issue, which typically arrives after the upgrade, when you install quality updates that are supposed to resolve the problems with the original release, but they end up causing other issues.

This guide includes the instructions to deal with all these types of problems when upgrading to the Windows 10 May Update from versions 20H2, , or an older release using the Media Creation Tool, Update Assistant, or Windows Update. Although the recommended method to switch versions is to use the Windows Update settings, you may still come across problems that may not be easy to figure out, but there are a few things you can do to fix the problem.

Once you complete the steps, the Windows Update settings should now work to install the new version of Windows If the error code is 0xc , the problem is with the setup files, which Windows Update will fix automatically later.

In the event that you receive the error code 0xF , it could be that the device cannot contact the server to download the installation files. It could also mean that there is not enough space in the System Reserved partition. When Windows Update cannot download the files, it is usually because the device is using a VPN connection. The above steps are meant to disconnect using the built-in VPN client.

If you have a third-party client, check the software support website for more specific details. The error 0x indicates that some installation files are either damaged or missing. If the error persists, use the Media Creation Tool to upgrade the computer. On Windows 10, it is not uncommon for security software to write data inside the System Reserved partition that could prevent a new feature update.

If this is the issue, you can use third-party tools to change the partition size to MB or more. If you cannot seem to fix the problem, then upgrade using a clean installation to fix this problem and other existing issues since you will be starting with a fresh setup.

When using the Media Creation Tool or Update Assistant to install the May Update, the setup may stop unexpectedly with error code 0xB 0xD or 0xB7 0xA if there another process conflicting with the upgrade. You can quickly resolve this problem by terminating the process and restarting the setup. Using a clean boot to restart the Windows 10 setup or temporarily uninstalling the application causing the problem can fix the issue.

The Microsoft Media Creation Tool allows you to complete a clean installation or an in-place upgrade. However, even when this is the recommended tool when Windows Update does not work, you can also come across problems, including issues downloading the files and opening the application. During the preparation process, the Media Creation Tool pulls the setup files and any available updates from the Microsoft server to install the most recent build of Windows However, sometimes, the tool may get stuck during updates that will block the setup from continuing the installation.

Once you complete the steps, the connection will timeout and continue with the setup process without updates. If you are using the Media Creation Tool to perform an in-place upgrade, it could happen that the setup won’t start automatically after downloading the required files. If this happens, you may need to start the upgrade process manually. After you complete the steps, continue with the version 21H1 upgrade process.

Alternatively, you can try the Update Assistant to update the system to the newest version. If you are using a USB flash drive to install the Windows 10 May Update and the setup fails, some of the files may be damaged or missing. You can quickly get around this problem by recreating the bootable media with the Media Creation Tool.

After you complete the steps, the Media Creation Tool will create a new setup drive with the files to install the May Update. Microsoft also offers the Update Assistant, a utility to install new versions of Windows 10 when the Windows Updates option is having problems. However, even with this tool, you may not be able to upgrade your computer. Since the Update Assistant is meant to offer an easy mechanism to upgrade a device, the problems are usually related to networking, which you may be able to resolve doing the following:.

If the problem persists, then switch to the Media Creation Tool to perform an in-place upgrade to the May Update.

The error code starting with 0xC or 0x indicates a device problem during the Windows 10 May Update upgrade process. The installation of version 21H1 requires at least 20GB of space. If you do not meet this requirement, you will see one of the 0xC error codes. You can use this guide to find valuable tips to clear up unnecessary files to free up storage space on your device. If you have peripherals such as external drives, printers, Bluetooth devices, USB devices, cameras connected to the computer, disconnect them before proceeding to reduce the chances of problems upgrading to the May Update.

The error codes 0xC 0x and 0xC 0x may appear if there an issue with third-party security software. Usually, you can mitigate this problem by temporarily uninstalling the third-party antivirus, anti-spyware, and any other security solution installed on the device.

After you complete the steps, proceed with the upgrade process and reinstall the software one more time. The error code that starts with 0xC or 0x indicates a drive problem with one of the components, which you can usually fix by installing the latest update available. Important: When using an update you downloaded from the manufacturer support website, always use their instructions, and skip the steps below.

Once you complete the steps, the update will resolve the error codes previously preventing the device from installing the May Update. On Windows 10, an error starting with 0xC could indicate an issue with the current setup.

You can use this guide to use these tools to repair the Windows 10 installation. Alternatively, if the device continues to show an error code 0xC , the best option to continue with the upgrade would be using the Microsoft Media Creation Tool to perform a clean install of the Windows 10 May Update. In the upgrade process to version 21H1, you may also see the error code 0x 0x that describes a problem with the setup unable to find the installation files. You can quickly resolve this problem by removing any external drives connected to the device, including USB flash drives except the setup media and hard drives.

The error code 0x — 0x , 0x — 0x , or 0x — 0x means the device does not have enough space to perform the upgrade. You can fix this problem by clearing up temporary files from the computer to free up space. Once you complete the steps, continue with the upgrade to the first semi-annual update for Windows If you could not make enough room, you can connect an external storage such as a USB flash drive or external hard drive with at least 16GB of space that the setup can use as temporary storage for the upgrade.

You can also use this guide with more recommendations to clear up more storage space on your computer. As you try to upgrade a computer to version 21H1, you may see the error code 0xC , which indicates that the system has not completed the cleanup of the previous installation files. You can quickly get around this issue by rebooting the computer, or you can delete the previous setup files using Storage Sense. After you complete the steps, the tool will clean up the previous installation files, and you should now be able to proceed with the update.

The error code 0xF describes a compatibility problem with a drive or program installed on the device. Although many applications outdated programs, old drivers, or third-party antivirus can be the reason for this issue, it is usually a problem with the graphics driver.

When it is a known issue, the Media Creation Tool or Update Assistant should provide details of the app causing the problem. If this is a driver issue, then installing the latest updates from the manufacturer support website may help fix the problem. In the case that there’s not a newer update, you should consider using a beta release of the device driver.

If there is a bug, perhaps it is a known issue that the company is working to fix in an upcoming update, which may already be available as a pre-release. If you cannot find any updates, you can get around this problem by uninstalling the driver to proceed with the May Update and then reinstall it after the upgrade. When dealing with an incompatible application, either update or remove the app before proceeding with the upgrade. Once you complete the steps, continue with the installation of the May Update.

After the upgrade, you can reinstall the apps again. The error code 0xC — 0xC indicates a conflict with an application, which you can fix by removing the app in question. While applying the Windows 10 version 21H1 using the upgrade process or enablement package, you may see one of these two errors when completing the installation:.

These general error messages do not provide any specific details. However, you can find out the error code using the Settings app, which you can then use to research online and find the appropriate instructions to fix it. On Windows 10, a black screen is a common issue that can occur during or after installing a new version. Usually, the problem is the graphics driver or an issue during the upgrade process. If the error happened during the upgrade to the May Update, use this guide to resolve the issue.

If you cannot determine the problem, it could mean that the new version is not yet compatible with your computer. In this case, the option is to remove the update and roll it back to the previous installation. If you previously had the November Update or an older version, use these steps to uninstall the May Update:. After you complete the steps, the best action is to wait until a new update release to try the upgrade one more time.

If you updated installing the enablement package, then to uninstall version 21H2, use these steps:. In the case this is a known issue, Microsoft usually details the problem and workaround if applicable in the Windows 10 health dashboard page opens in new tab. When installing a new version of Windows 10 can also cause problems with Ethernet and Wi-Fi adapters. For instance, it is not uncommon to read user reports of connectivity problems or adapter breaking entirely.

Although there could be many reasons for a particular problem such as drivers, settings, wireless signal, cable, switch, router, and Internet Service Provider ISP , it could be a bug with the May Update.

If the issue happens after applying Windows 10 version 21H1, this is likely a driver or configuration-related problem, which you can usually fix using the network troubleshooter or resetting the networking stack. If you still cannot connect to the network, resetting all the network adapters may fix the problem. After you complete the steps, Windows 10 uninstall and reinstall all the adapters, and it will reapply all the default settings.


Windows 10 not booting after update may 2018 free.Windows 10 Not Booting after Update

From the Install Windows screen, choose “Repair your computer” to launch the Windows Recovery Environment. Select Troubleshoot > Advanced Options > Startup Repair from the Troubleshoot menu. Next, choose the operating system that has to be fixed. Windows will start the repair process and then reboot. Boot in Safe Mode. May 01,  · Open Settings, and navigate to Update & Security > Recovery > Advanced Startup, and select Restart now. In Choose an option screen, Troubleshoot > Advanced options > Startup Settings > Restart. You. The C:\Windows\SoftwareDistribution folder is the location where Windows stores the new updates after downloading them. If Windows could not complete the installation of an update, then, from WinRE proceed and delete the “SoftwareDistribution” folder, in order to force Windows to boot normally without installing any updates. To do that: 1.