What are the heavy construction equipment safety tips? Almost all building projects require heavy machinery. Unfortunately, if not utilized correctly, they can be very harmful. When operating on or close to heavy machinery, workers frequently get injuries from rollovers, collisions, and being stuck in or between incidents.

To stay productive and help keep the jobsite accident-free, follow these safety precautions when using heavy machinery on a construction site:

Training for Equipment Operators

Workers should receive training on how to operate every piece of equipment they will use safely. Training should consist of both classroom learning and real-world application. Safety, hazard identification, equipment safety features, and safe operation of heavy machinery should all be covered.

Workers should receive training on safe mounting and dismounting techniques as well as how to properly start each piece of equipment. In heavy construction equipment safety tips, they ought to be fully aware of the lifting capacities and load capacities of the machinery they will be using. Retraining and refresher training should be given as needed, especially if a worker is seen using equipment improperly or for a purpose other than what it was designed for. Equipment should only be operated by qualified personnel under any circumstances.

Heavy Construction Equipment Safety Tips


Be Conscious of Your Environment

You must be aware of the environment you are working in and any potential barriers when using heavy equipment. In order to avoid coming into contact with overhead electrical lines, they should be deenergized or, if that is not possible, barriers should be put in place. To avoid damaging subsurface facilities, generating delays, and adding to the workload when digging, make sure that all of the utilities, including sewer, water, gas, and electricity, have been identified and correctly labelled.

Workers should, whenever possible, stay away from locations where large machinery is in use. In order to prevent running into other workers, bystanders, nearby cars, or other pieces of machinery or equipment, operators should be aware of their swing radius, especially when working in smaller spaces.

Equipment Access and Exit

Given the number of workplace accidents that occur each year, heavy construction equipment safety tips should go without saying that there are proper and improper ways to mount and descend from large pieces of machinery. Always maintain three points of contact when going onto equipment, just as you would when ascending a ladder. Never have anything on you when getting in or out of the cab. Never leave the cab or the equipment by jumping off of it.

Never enter or leave moving or operating equipment. Ensure that the machinery is totally off, that the parking brake is applied, and that all hydraulic control pressure has been released. To prevent any illegal use, be sure to bring the keys with you.

Equipment Inspection Before Use

Before each use, visually check heavy equipment to be sure it’s in good working order. Examine the tracks and tires for wear and damage. Before turning on the equipment for the first time each day, you should at the very least check the fluid levels, including those for the engine oil, hydraulic fluid, and oil. Check for cracks and damage on hydraulic hoses, buckets, booms, and other parts. Ensure that every attachment is firmly fastened into place.

Make that the equipment’s lights, gauges, horn, and backup alarms are all in working order before starting it up. Ensure that all arms, shovels, buckets, and other objects are fully extended in all directions. Verify if the cab can swivel in all directions if it does. Never use equipment that seems damaged or isn’t functioning properly. Not only might you further harm the machine, but if it isn’t rectified before usage, it could pose a serious safety risk.

Use the equipment only as directed.

Each piece of machinery was created to carry out a particular function. Excavators aren’t cranes, and wheel loaders weren’t designed to be utilized as an aerial lift or to carry workers in the bucket. Choose the appropriate tool for the job at hand, then utilize it as the manufacturer intended.

Equipment should not be overworked or loaded. Pay attention to the equipment’s lift or payload capabilities. If what you already have is insufficient to complete the task, you might need to purchase a larger piece of equipment. Make sure all riggings are securely fastened if you are lifting material. When operating machinery, especially on slopes, try not to go too quickly.

Put on your seatbelt.

Seatbelts are not merely a recommendation; they may even save your life. The seatbelt will probably keep you alive if the vehicle tips over or starts to roll. You might feel driven to get out of the cab out of instinct if the equipment starts to roll over or tip. The worst thing you could possible do is that, sadly. The machinery could roll over and collapse on you as you try to flee, or it could catch you and damage you severely if you get caught or thrown out.

The equipment has a rollover protection system in place to keep you secure in the event of a rollover. The seatbelt will prevent you from being thrown from the cab, bumped around, and bruised.

Keep the space free

If possible, you should enclose the space with barriers to prevent employees from inadvertently entering the vicinity of active machinery. Use a spotter to keep your blind spots clear if you are moving or operating equipment close to workers. Spotters can communicate by radio or hand gestures. This is particularly crucial while backing up. Yes, the backup alarms on the equipment will sound, but because they are so common on construction sites, people frequently ignore them.

More advice to keep in mind

Always put on the appropriate personal protection equipment (PPE), such as hard hats, safety goggles, robust boots, and gloves.

Make sure to load and unload equipment on level ground at the job site to prevent rollovers when loading or unloading it onto or off of a vehicle or trailer.

When servicing or performing maintenance on equipment, adhere to lock-out/tag-out procedures. Make sure the parking brakes are applied, and then block the wheels using chocks.

You should include working with or around heavy equipment in your entire safety program. All employees ought to get training on the risks involved with using heavy machinery.

Source